Rail King SD-90 MAC Manual del operador descargar pdf (Pagina 10)

Maintenance

ProtoSmoke® Unit Operation

This Premier diesel locomotive contains a self-powered smoke unit that outputs

smoke through the smokestack on the roof of the engine. The smoke unit is

essentially a small heating element and wick that soaks up and then heats a

mineral oil-based fluid that emits a harmless smoke. The smoke is then forced

out of the stack by a small electric fan. Smoke volume is controlled by the

Proto-Sound 2.0 system, or by the smoke unit volume control in conventional

mode.

With a few easy maintenance steps, you

should enjoy trouble-free smoke unit

operation for years.

When preparing to run this engine, add

15-20 drops of smoke fluid through the

smokestack (see Fig. 2). We recommend

M.T.H. ProtoSmoke, Seuthe, LGB, or

LVTS fluids. Do not overfill the unit or

the fluid may leak out and coat the interior

engine components.

If you choose not to add the fluid (or have

already added the fluid but choose to run

smoke-free), turn off the smoke unit

volume control located under the engine

(see Fig. 3). Failure either to add fluid to

the unit or to turn it off may damage the

smoke unit heating element and/or

wicking material.

When the smoke output while running the

engine begins to diminish, add another 10-

15 drops of smoke fluid or turn the smoke

unit off.

When storing the unit for long periods of time, you may want to add about 15

drops of fluid to prevent the wick from drying out.

Figure 2. Add Smoke through

the Smokestack

Figure 3. Smoke Unit

Volume Control

Add Smoke Fluid

Through Smokestack

Smoke Unit

Volume Control

Premier Scale SD90MAC Diesel Engine Operating Instructions

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 26 27

Sin comentarios

Rail King SD-90 MAC Manual del operador Pagina 10